GridFit

Lenercom LC-E2-1045T

Hybrid inverterin 3 of 7 listsno product family claims this code yet

Localnot found· seen 2026-10-31
Grid✓✓✓fit in AT, BE, NL

Grid listsLocal controlAll Lenercom models

Grid-connection lists

The list is the authority; this is a cross-reference.

Is the Lenercom LC-E2-1045T on the Austrian TOR Erzeuger Typ A list?

Yes — the Austrian TOR Erzeuger Typ A list lists it as “Ja - mit Einschränkung”; restriction applies from firmware: Software Version Identifier: 0; DSP Version: V1.03.30; ARM Version: V1.02.23; … (list dated 2026-10-30, checked 2026-10-31).

Steht der Lenercom LC-E2-1045T auf der österreichischen Wechselrichterliste (TOR Erzeuger Typ A)? Laut Liste vom 2026-10-30: „Ja - mit Einschränkung“.

Is the Lenercom LC-E2-1045T on the Belgian Synergrid C10/26 list?

Yes — the Belgian Synergrid C10/26 list lists it as “listed” (list dated 2026-10-30, checked 2026-10-31).

Is the Lenercom LC-E2-1045T on the Dutch Netbeheer Nederland type-A list?

Yes — the Dutch Netbeheer Nederland type-A list lists it as “listed” (list dated 2026-10-30, checked 2026-10-31).

  • ATAustria — listed with restrictions “Ja - mit Einschränkung” · restriction applies from firmware Software Version Identifier: 0; DSP Version: V1.03.30; ARM V · Austrian TOR Erzeuger Typ A list dated 2026-10-30, read 2026-10-31✓
  • BEBelgium — listed · Belgian Synergrid C10/26 list dated 2026-10-30, read 2026-10-31✓
  • CZCzechia — Not found on the list · Czech ČEZ Distribuce list dated 2026-08-21, read 2026-10-31
  • EEEstonia — Not found on the list · Estonian Elektrilevi inverter list (undated), read 2026-10-31
  • NLNetherlands — listed · 2 rows · Dutch Netbeheer Nederland type-A list dated 2026-10-30, read 2026-10-31✓
  • PLPoland — Not found on the list · Polish PTPiREE WiPWC 1.3 list dated 2026-10-26, read 2026-10-31
  • SESweden — Not found on the list · Swedish Rikta Rätt inverter list dated 2026-10-23, read 2026-10-31

The other 36 countries: a hybrid inverter there

No model rows for these: they publish no usable list, or GridFit has not read it. Each gets one answer by the same rule as the grid view — the maker's own document first, then the country's type-A ceiling, then what the lists read say.

Possibly fit: accepted on other EU lists (25)

Bosnia and Herzegovina?SwitzerlandCyprusGermanysDenmark?SpainFinlandFrancesGreat BritainGreecesCroatiasHungaryIrelandItalysLiechtenstein?LithuaniaLuxembourgMoldova?Northern Ireland?NorwayPortugalRomania?SloveniasSlovakiaTürkiye?

On 3 EU lists (AT, BE, NL): the maker has had the model certified and 3 grid operators accept it. Nothing is checked in these countries themselves: where there is no list the grid operator reads the maker's certificate for that country — ask the maker or installer for it; where a list exists that GridFit has not read, check the model there.

Unknown: not confirmed (11)

Albania?Bulgaria?Georgia?Iceland?Latvia?Montenegro?North Macedonia?Malta?Serbia?Ukraine?Kosovo?

Whether a list or a rule applies is not confirmed yet.

s = from search results, ? = unverified; without a mark the country page was opened. The state per country comes from the EU+ grid-connection table; each country page says more.

List by list

AT — Austria

List
Wechselrichterliste TOR Erzeuger Typ A (dated 2026-10-30)
Status
✓* listed with restrictions — “Ja - mit Einschränkung”
As written
Lenercom · LC-E2-1045T
Restriction applies from firmware
Software Version Identifier: 0; DSP Version: V1.03.30; ARM Version: V1.02.23; LCD Version: V1.02.23; CPU1 Software Version: V1.03.33; LCD Subversion: 03.04; CPU1 Subversion: 01.10
Match
exact · seen 2026-10-31

Rows are matched by maker and a normalised model code; the “as written” line shows exactly what each list says. Check the list itself, and your grid operator, before you install.

Local control with Home Assistant and evcc

Checked 2026-10-31.

not found Not found in Home Assistant core, the HACS default list or the evcc templates under this brand (checked 2026-10-31). That is not “does not work” — it means no source we read names it. Know a route?

Wrong match or a newer list? Fix the row

What changed in the lists