GridFit

Atmoce MI450

Plug-in solar / battery (≤ 800 VA)in 3 of 7 listsno product family claims this code yet

Localbrand route, model unconfirmedAtmoce battery, MG100 M-gateway· seen 2026-10-31
Grid✓✓✓fit in AT, CZ, SE

Grid listsLocal controlAll Atmoce models

Grid-connection lists

The list is the authority; this is a cross-reference.

Is the Atmoce MI450 on the Austrian TOR Erzeuger Typ A list?

Yes — the Austrian TOR Erzeuger Typ A list lists it as “Ja - mit Einschränkung”; restriction applies from firmware: Inverter FW: 01.01.00 Gateway FW: 01.01.00 (list dated 2026-10-30, checked 2026-10-31).

Steht der Atmoce MI450 auf der österreichischen Wechselrichterliste (TOR Erzeuger Typ A)? Laut Liste vom 2026-10-30: „Ja - mit Einschränkung“.

Is the Atmoce MI450 on the Czech ČEZ Distribuce list?

Yes — the Czech ČEZ Distribuce list lists it as “listed”; approved firmware: 01.01.00 (list dated 2026-08-21, checked 2026-10-31).

Is the Atmoce MI450 on the Swedish Rikta Rätt inverter list?

Yes — the Swedish Rikta Rätt inverter list lists it as “listed”; firmware: 01.01.00 (list dated 2026-10-23, checked 2026-10-31).

  • ATAustria — listed with restrictions “Ja - mit Einschränkung” · restriction applies from firmware Inverter FW: 01.01.00 Gateway FW: 01.01.00 · Austrian TOR Erzeuger Typ A list dated 2026-10-30, read 2026-10-31✓
  • BEBelgium — Not found on the list · Belgian Synergrid C10/26 list dated 2026-10-30, read 2026-10-31
  • CZCzechia — listed · approved firmware 01.01.00 · Czech ČEZ Distribuce list dated 2026-08-21, read 2026-10-31✓
  • EEEstonia — No list, a requirement applies · Estonian Elektrilevi inverter list (undated), read 2026-10-31
  • NLNetherlands — Not found on the list · Dutch Netbeheer Nederland type-A list dated 2026-10-30, read 2026-10-31
  • PLPoland — No list, a requirement applies · Polish PTPiREE WiPWC 1.3 list dated 2026-10-26, read 2026-10-31
  • SESweden — listed · firmware 01.01.00 · Swedish Rikta Rätt inverter list dated 2026-10-23, read 2026-10-31✓

The other 36 countries: a plug-in solar there

No model rows for these: they publish no usable list, or GridFit has not read it. Each gets one answer by the same rule as the grid view — the maker's own document first, then the country's type-A ceiling, then what the lists read say.

Fit: nothing to approve for this kind of device (3)

LuxembourgMoldova?Portugals

No list and no model-level rule for this kind of device: nothing to approve, so the model is fit here as far as a list goes.

Possibly fit: accepted on other EU lists (12)

SwitzerlandGermanysSpainFrancesGreat BritainGreecesHungarysItalyLiechtensteinLithuaniasMontenegroRomania

On 3 EU lists (AT, CZ, SE): the maker has had the model certified and 3 grid operators accept it. Nothing is checked in these countries themselves: where there is no list the grid operator reads the maker's certificate for that country — ask the maker or installer for it; where a list exists that GridFit has not read, check the model there.

Unknown: not confirmed (18)

Albania?Bosnia and Herzegovina?BulgariasCyprussGeorgia?CroatiasIrelandsIceland?Latvia?North MacedoniaMaltasNorthern IrelandSerbiasSloveniasSlovakia?Türkiye?Ukraine?Kosovos

Whether a list or a rule applies is not confirmed yet.

Not fit: not allowed (3)

DenmarksFinlandsNorway

This kind of device is not allowed to be connected.

s = from search results, ? = unverified; without a mark the country page was opened. The state per country comes from the EU+ grid-connection table; each country page says more.

List by list

AT — Austria

List
Wechselrichterliste TOR Erzeuger Typ A (dated 2026-10-30)
Status
✓* listed with restrictions — “Ja - mit Einschränkung”
As written
Atmoce · MI-450 (mit Gateway & M-Relay)
Restriction applies from firmware
Inverter FW: 01.01.00 Gateway FW: 01.01.00
Match
alias · seen 2026-10-31

Spellings joined on this page: MI-450 · MI-450 (mit Gateway & M-Relay) · MI450.

Rows are matched by maker and a normalised model code; the “as written” line shows exactly what each list says. Check the list itself, and your grid operator, before you install.

Local control with Home Assistant and evcc

Checked 2026-10-31.

brand route, model unconfirmed No integration or template names this code. Atmoce has 2 families with a local route; whether this model belongs to one of them is not confirmed:

Know which family it belongs to? Fix the row: the family's model-code pattern then claims it.

Wrong match or a newer list? Fix the row

What changed in the lists